欢乐颂小说txt,完美世界txt下载

YG086C型縷紗測長機英文說明書

信息來源：中纖儀器 | 發布日期： 2020-07-10 10:08 | 瀏覽量次

First, use

This instrument is used to sample the yarn on the bobbin thread yarn box to go to yarn, yarn for the yarn density (or count) the determination of yarn and thread with a breaking strength test. Performance in line with GB/4743 "hank yarn linear density determination method"
The whole structure is simple, the control system uses the world-famous MIXIN Maxim PIC microcontroller and reliable software systems, and Siemens advanced integrated circuit. PWM technology using a wide range of variable speed control, turns shows high brightness LED display. Operation keys with touch buttons, set the number of turns is extremely convenient. Using software to control the final two laps automatically slow down and stop in a fixed position.

Main technical parameters

1, while test tube yarn: 1-6
2, the spindle distance: 65 mm
3, the yarn box perimeter: 1000 ± 1 mm
4, the yarn frame speed: 30 ~ 300 r / min
5, the yarn guide rod move back and forth process: 35 mm
6, single yarn tension adjustment range: 0 ~ 100 cN
7, turns setting range: 5 to 9999 laps
8, power supply voltage: AC 220V ± 10%, 50Hz
9 Total power consumption: 200 W
10 Overall dimensions: (L × W × H) 750 mm × 680 mm × 500mm
11, weight 55 kg
Third, the whole shape of Figure
Figure 1 YG086-type diagram appearance strand yarn measuring machine
1 spindle bar 2 yarn guide 3 Tensioners
Tension Scale 6 5 4 panel tension WANDS
The yarn traverse guide 7 8 9 yarn frame pointer
10 12 count handle electrical control panel 11
Fourth, control, monitor panel diagram
1 Start 2 Stop button 3 set 4 set number of turns the shift key plus a key data
      Reset button 5 6 7 laps display stepless speed adjustment knob 8 Power Switch

Figure 2 Panel Structure

Fifth, operating instructions

1, the instrument should be placed on a solid bench, wipe the metal parts with a cotton cloth on the anti-rust oil.

2, connected to AC 220 V power supply, power switch, then circle the number of display 100 indicates the factory setting is 100 laps. (Such as displaying other digital press reset button).

3, number of laps setting: Click "▼" key, the digital display flashes, then click the "▲" plus one of the digits, four digits set is complete, press the "reset" button.

4, the yarn speed control box, press the "start" button, adjust the speed control knob on the control panel, generally choose to 200r/min so.

5, starts, turns the subtraction count display, auto slow down to the last two laps. Halfway press the "Stop" button
Can make the yarn box to stop rotation, press the "reset" button allows the display turns reset to the original settings.

6, adjust the tension scale, the reeling tension according to the selected single reeling tension, the tension in the tension on the scale of the rider to move the reeling tension value of the selected place, and tighten the knurled screw tension rider. Single reeling tension of the yarn tension according to state calculations, usually the sample yarn 0.5 cN / tex, can refer to Table 1 to select reeling tension.
Table 1 Select the reeling tension selection
Line density (tex)
7 ~ 7.5 inch count
90 ~ 70 8 ~ 10
70 ~ 50 11 ~ 13
55 ~ 44 14 ~ 15
43 ~ 37 16 ~ 20
36 ~ 29 21 ~ 30
28 ~ 19 32 ~ 34
18 ~ 17 36 ~ 60
16 ~ 10 64 ~ 80
9 ~ 788 ~ 192
6 3
Reeling Tension
(CN) 3.6 4.5 6 7.3 9 12.8 16.5 24 36 70
6.1, when the six yarn tube pan at the same time take the strand yarn, the tension on the scale of values ??is equal to a single reeling tension. If both roll the yarn bobbin thread take less than the standard number, the tension on the scale of values ??according to Equation 1 determined to shake take strand yarn.
                            (1)
Where: - According to the same time reeling yarn tension control number on the scale after the conversion value;
       - Single reeling tension (ie, early yarn tension);
       - While reeling the yarn number of tubes.
6.2 a variety of quality yarn and tension scale test stick friction coefficient (), if need accurate
Control the reeling tension, the tension on the scale of values ??according to equation (2) calculation.
                          (2)
Where: - calculated according to different values ??in tension on the scale;
       - According to the correction factor;
- Yarn tension detection stick with native dynamic coefficient of friction (measured with other instruments).
Table 6.3 Value
2 look-up table values

                               Table 2 Value Table

	0.25	0.3	0.35	0.4	0.45	0.5
	1.046	1	0.995	0.912	0.873	0.873

7 operation sequence
7.1 yarn tube inserted in the spindle pole.
7.2 bobbins of yarn into yarn on the hook, the tension adjuster, tension test rods, traverse yarn guide and the yarn end of the first frame of each clip fixed to the yarn on the yarn sheet.
7.3 Press "start" button, yarn box began to turn, begin to reduce the count preset value, when it reaches the preset value of the last two laps, the yarn box automatically stopped, then slowly rotate to complete the preset stop. And automatically restore the preset value to start the next test.
7.4 in the yarn box rotation, should pay particular attention to the tension on the scale pointer is at the scale of the panel, if not met, adjust the tension adjuster in the first two open parallel to the tension rod and the yarn angle to achieve a small amount of differences in speed can be adjusted to achieve the yarn box reeling process pointer in a small amount of fluctuation is allowed.
7.5 adjustment, to make the yarn tension regulator along a thick tension rods in the surface tension on the rod surface to detect traverse yarn guide, yarn winding to frame, traverse the level of yarn guide, the location can not be random changes, or to affect the tension on the scale of the indication of accuracy.
7.6 before the start of the next, press the "reset" button to see the pre-value is correct.
8 Notes
8.1 Instruments used packing machine, is strictly prohibited wooden box upside down.
8.2 Unpacking the instrument in the process of transportation and should be prevented by severe shock and vibration, when first unpacking box cover, then put down the four sides of the box out of the instrument panel.
8.3 Instrument Power 220V; 50Hz. Instruments plug into the socket must be safe and effective single-phase grounded to ensure safety.
8.4 yarn perimeter frame and tension scales show the value of the factory before the stringent correction and can not dismantled.
8.5 Instrument power off after use, and make the instrument cleaning.
8.6 When equipment fails, or contact by professional maintenance company, to be resolved in time.

Sixth, the mechanical and electrical schematic
The mechanical and electrical schematic shown in Figure 3, Figure 4.

轉載請注明出處（YG086C型縷紗測長機英文說明書：[field:arcurl/])

上一篇：液體穿透性試驗儀

下一篇：YG041型原棉雜質分析機英文說明書

相關技術

2019-05-10 >??PS-328 噴絲板鏡檢儀技術指

2020-11-03 >??YG086C型縷紗測長機

2021-10-28 >??纖維卷曲彈性儀

2019-10-07 >??簡述YG367型全自動化纖長絲

2019-09-30 >??強力機的日常保養

2019-04-22 >??DDY6506變形絲卷縮儀

2019-06-18 >??YG155A型電子紗線捻度儀故

2019-08-03 >??強力機的種類